Dell Emulex Family of Adapters - Manual (Page 368)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Dump Commands
368
Parameters
Example
hbacmd h=10.192.193.154 m=cim u=root p=Swamiji001 n=root/emulex
GetDumpFile BG-HBANYWARE-15_10000000c97d1314_20100120-032820421.dmp
GetDumpFileNames
This command gets the names of the files in the remote host’s dump directory.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetDumpFileNames <WWPN|MAC>
Parameters
Example
hbacmd h=10.192.193.154 m=cim u=root p=Swamiji001 n=root/emulex
GetDumpFileNames
GetRetentionCount
This command shows the maximum number of diagnostic dump files to keep.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetRetentionCount <WWPN|MAC>
Parameters
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
filename
The name of the dump file to be copied from the remote host.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.