Dell Emulex Family of Adapters - Manual (Page 1687)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1687
iSNS Configuration
Note: This functionality is only available on UEFI-capable HP adapters.
The Internet Storage Name Service (iSNS) Protocol allows automated discovery,
management and configuration of iSCSI and FC devices (using iFCP gateways) on a
TCP/IP network.
To view the iSNS Configuration screen:
1. On the Controller Configuration menu (Figure 12-2), select iSCSI Target
Configuration and press <Enter>.
Figure 12-22 iSCSI Target Configuration Screen
2. On the iSCSI Target Configuration screen, select iSNS Configuration and press
<Enter>. The iSNS Configuration screen is displayed.
Figure 12-23 iSNS Configuration Screen
The iSNS Configuration screen enables you to perform the following tasks:

Enable or disable iSNS discovery mode

Enable or disable iSNS server discovery via DHCP

Configure the iSNS server IP address and TCP port number manually

Save any changes made to the iSNS configuration

View a list of available iSNS servers