Dell Emulex Family of Adapters - Manual (Page 216)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OCe14000-Series Adapters
216
Figure 8-70 OCe14000-series Adapter Configuration Tab (FCoE selected)
OCe14000-series Adapter Configuration Tab Field Definitions

Current Configuration – The protocol running on the adapter.

Next Boot Configuration – Displays different checkboxes or radios buttons
subject to the protocol running on the adapter. Select a checkbox or radio button
to change the tab's view and next boot configuration method.

The display in the lower area of the tab depends upon selected view of the next
boot configuration. For non-NPar configurations, depending upon
configuration options available on the adapter, you can configure the adapter
for a single personality (e.g. FCoE), multichannel or a custom configuration (for
mix and concurrent modes).
OCe14000-series Adapter Configuration Tab Buttons

Apply - Saves the changes to the next boot configuration to the adapter.

Restore - Resets any changes to the next boot configuration back to the currently
saved settings on the adapter.

Factory Defaults - Returns the adapter’s ports to their factory default profile and
settings for that adapter. A reboot is required.