Configuring boot support, Configuring boot support 7, Figure 12-4 – Dell Emulex Family of Adapters User Manual
Page 1667
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Configuring Boot Support
1667
Configuring Boot Support
Boot support is provided for each port or function. If boot support is enabled, you can
boot from the specified function. If boot support is disabled, you will not be able to boot
from the function.
To configure boot support:
1. From the Storage screen (Figure 12-1), select the Emulex iSCSI Utility for a
particular function and press <Enter>. The Controller Configuration Menu is
displayed.
Figure 12-4 Controller Configuration Menu Screen with Boot Support Setting Highlighted
2. Select Boot Support and press <Enter>.
3. From the Boot Support pop-up menu, select Enable or Disable and press <Enter>.
4. To save your changes, select Save Changes and press <Enter>.