Dell Emulex Family of Adapters - Manual (Page 363)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Driver Parameter Commands
363
DriverConfig
This command sets all driver parameters to the values in the .dpv file type. The .dpv
file’s driver type must match the driver type of the host platform adapter.
Supported By
Linux, VMware ESXi, and Windows
Syntax
DriverConfig <WWPN> <FileName> <Flag>
Parameters
GetDriverParams
This command shows the name and values of each parameter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetDriverParams <WWPN>
Parameters
GetDriverParamsGlobal
This command shows the name and the global value of each driver parameter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetDriverParamsGlobal <WWPN>
Parameters
WWPN
The WWPN of an FC or FCoE port.
FileName
The name of the .dpv file, which is stored in the Emulex Repository
directory.
Flag
G = Make change global (all adapters on this host).
N = Make change non-global (adapter-specific).
WWPN
The WWPN of an FC or FCoE port.
WWPN
The WWPN of an FC or FCoE port.