Getxcvrdata, Loadlist – Dell Emulex Family of Adapters User Manual
Page 357
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Diagnostic Commands
357
GetXcvrData
This command shows transceiver data for a port on an adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetXcvrData <WWPN|MAC> [Type]
Parameters
Example
C:\Program Files\emulex\Util\OCManager>hbacmd h=10.192.203.154 m=cim
u=root p=Swamiji001 n=root/emulex GetXcvrData 00-00-c9-93-2f-d6
LoadList
Note: This command is not supported for OneConnect and LPe16202-series adapters.
This command shows the flash memory load list data for the adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
LoadList <WWPN>
Parameters
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
Type
The type of SFP data to display:
1 = Formatted data
2 = Raw data
WWPN
The WWPN of the adapter.