Dell Emulex Family of Adapters - Manual (Page 1683)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1683
Note: When you configure the CHAP parameters, verify that those parameters
match the parameters on the storage side.
4. Select Save/Login and press <Enter>.
Pinging a Target
Note: If you want to verify that you can connect to a target before you log in, you must
ping the target before you configure the target on the Edit/Ping Target screen.
To ping a target:
1. On the iSCSI Target Configuration screen, select the target name and press <Enter>.
The Edit/Ping Target screen is displayed.
Figure 12-18 Edit/Ping Target Screen