Relay, Tape playback, Playing both decks in succession—relay play – Sony MHC-3500 User Manual

Page 40: Direction mode, 1 insert recorded cassettes in both decks, 2 set direction mode to relay, 3 press o or <l on deck a or deck b, To stop relay play, Notes on cassettes, To protect recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1

RELAY

Tape Playback

Playing Both Decks in
Succession—Relay Play

Relay play always follows the sequence
below regardless of where playback starts.
When playback of the reverse side of the
tape in deck B is completed, the following
sequence continues 4 more times.

DIRECTION MODE

1

Insert recorded cassettes in both

decks.

2

Set DIRECTION MODE to RELAY.

3

Press O or <l on Deck A or Deck B.

To stop relay play

Press □ of the playing deck.

Notes on Cassettes

To protect recording

Break out the tab on the left shoulder of the
cassette side of which recording is to be
protected.

To re-record the cassette

Ef___

Cover each slot with plastic tape.

When using a type 11 (Cr02) or type IV

(METAL) cassette,'be careful not to cover
the detector slots (Q ) which are
necessary for automatic tape type
detection. B

40

Advertising