To change the time and program, 1 press timer set, When you do not want to use the timer program – Sony MHC-3500 User Manual
Page 74: When the power is already on at the preset time, Timer-activated operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer-Activated
Operation
TIMER CONTROL
PRESET/TIMER
To change the time and program
1
Press TIMER SET.
The timer-on hour blinks.
2
Press ENTER/NEXT until the item to
be changed blinks.
3
Press PRESET/TIMER + or - until the
desired time or source appears.
4
Press ENTER/NEXT until timer-on
time appears. The display, then, shows
timer-off time, and returns to the
previous display.
When you do not want to use the
timer program
Press TIMER CONTROL to turn off TIMER.
To reactivate the timer, press TIMER
CONTROL to display “TIMER".
When the power is already on at the
preset time_____________________
The function mode will be automatically
changed to the preset one, even if you are
playing a program of another function.
However, when you have preset the
TUNER REC mode, recording will not start
even though the station is tuned in. Be sure
to turn the power off before the preset time
for tuner recording.
Important
On the recording side of a tape during timer
recording
Playttack or recording always starts from the
front side (the side facing you).
When you want to record one side only, be
sure that the side you want to record is facing
you.