Cd recording operation, If the tape ends in the middle of a selection [â, To record only the desired selections – Sony MHC-3500 User Manual

Page 64: 1 program the selections for side a, 3 program the selections for side b, 4 press cd synchro, 5 press pause on the cassette deck

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I

Front side/Face avant/Vorlaufseite/Facciate anteriore

IX

j

---------^ Reverse side/Face inverse/Reverseseite

/Facciata posteriore

CD Recording Operation

If the tape ends in the middle of a
selection [Â]______________________

The tape is rewound to the beginning of the
selection. Then the selection is re-recorded

so that it fades out naturally at the end of
the tape.
If the recording is to be continued to the
reverse side, the selection that faded out on
the front side is recorded from its beginning
on the reverse side.

To record only the desired
selections

Before pressing CD SYNCFIRO, program

the desired selections. (See page 28.)
To program for both sides continuously,

insert a pause section between the
selections for side A and those for side B.

1

Program the selections for Side A

2

Press II for CD operation on the

remote commander.
The total play time will be reset to 0.

3

Program the selections for side B.

4

Press CD SYNCHRO.

5

Press PAUSE on the cassette deck.

Recording starts.

When the CD play of side A ends, the CD
player enters pause mode. When the tape
comes to the beginning of side B, the CD
play of side B starts and the recording starts
automatically.

64

Advertising