Sony MHC-3500 - Manual (Page 52)

1
2,6
L
[ AUX/VIDEO ]
L
PHONO
PRodfiAM
FUNCTION
O
SURROUND
a
CURSOR CONTROL
0
&
«•( )t>
?
0
5
■ 4
-1
Using the
Graphic equalizer
Storing the Settings of Sound
Effect — Program Function
You can store into the memory the settings
of the functions below:
• Equalization ON/OFF
• Surround ON/OFF
• Graphic equalizer settings
• Display
By selecting a function, you can easily call
up the stored settings. One setting is
possible for each function (program source).
1 Select the function and start playing.
2 Press PROGRAM FUNCTION.
The red indicator lights.
3 Set the surround effect (See page 18).
4 Adjust the equalizer (See page 46).
5 Choose either the equalizer curve
display or the spectrum analyzer
display with DISPLAY (See page 44).
6 Keep PROGRAM FUNCTION pressed
until the green indicator turns red.
The settings of the graphic equalizer and
surround are stored. The settings
previously stored for this function are
erased and replaced by the new settings.
You can store the volume setting for
Program Function when you use
timer.
1 Proceed the steps 1-5 above.
2 Adjust the volume.
3 Keep PROGRAM FUNCTION pressed
until the green indicator turns red.
DISPLAY