Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 15)

Introduction 9
5. Press MENU to return to the weigh mode.
Note
The PRINT key only performs one accumulation, and only if the weight is above the accumulator threshold.
Weight must return to below the accumulator threshold value before another accumulation is allowed.
Accumulator threshold is configured in the setup menu, see Section 3.2.3.
1.4.14 Display Tare
When a stored Tare value is displayed, the Gross and Net LEDs will be off and the will be lit. To display a
stored tare:
1. Press MENU .
2. Press to
TARE
and press to view the current tare value.
3. Press MENU twice to return to weighing mode.
If there is no tare in the system, the value displayed will be zero and the Gross and Net LED will be turned off.
See Section 10.5 for more information pertaining to the regulatory mode of operation.