Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 62)

56 880 Technical/Service Manual
3.2.16 Version Menu
The VERS menu is used to check the firmware version installed in the indicator and to set the indicator
configuration to factory defaults.
SETUP
.... ....
....
VERS
....
DEFALT
NO
YES
REG
LRV X.XX
SOFTWR
VX.XX.XX
Figure 3-24. Version Menu Structure
Table 3-18. Version Menu Parameters
VERSION Menu
Parameter Choices Description
SOFTWR VX.XX.XX Displays firmware version number.
REG LVR X.XX Displays the Legally Relevant firmware version number.
DEFALT NO
YES Performs a reset of all the indicator parameters to factory default settings.
Important All configuration and load cell calibration data will be lost.