Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 18)

Panel for mounting
indicator (Ref)
Din Rail Mounting Plate
Display Assembly
6-32 Kep Nuts
Ensure gasket is seated
properly on display
assembly before
mounting.
Important
Back of panel
Front of panel
12 880 Technical/Service Manual
Figure 2-3. Mounting Display Assembly
5. Connect the cable assembly to the controller assembly.
6. Place the controller assembly on the DIN rail as shown in Figure 2-4.
7. Secure to DIN rail by rotating the left and right hooks up connecting with the bottom rail.
Connect Cable assembly to
controller assembly
Controller
Assembly
Rotate hooks to secure
to bottom DIN rail
A slot is provided for a
screwdriver to lift the
positioning dimple from
the locating hole prior to
rotating the lever.
Figure 2-4. Install Controller Assembly