Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 25)

Green LED
Yellow LED
Installation 19
Figure 2-11. RJ45 Ethernet Jack
Important
The Ethernet port is not intended for use on Telecom Networks Circuits that are subject to lightning or
power faults.
For information on using the Ethernet port, see Section 9.1 on page 87.
2.8 CPU Board
J1 J2 J3 J5 J6
Remote
Sense
Jumpers
JP5
JP6
J7
J8
J4
Audit
Jumper
JP4
RS-232/RS-485 SW3
Figure 2-12. 880 CPU Board
Connectors
• Load cell (J1)
• DIO (J2)
• Comm 1 (J3) • USB Micro Device (J4)
• USB Host (J5)
• Ethernet TCP/IP (J6) • Opt Header (J8)
• Power Board (J7)
The COMM 1 port supports RS-232 or two-wire RS-485 communications; selectable with switch SW3. The port is
configured using the COM menu under Ports. See Section 3.0.