Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 54)

48 880 Technical/Service Manual
3.2.12 Print Format Menu
PFORMT
.... ....
SETUP
.... ....
GFMT
FMT
COM
ETH-S
USBCOM
PORT
format
NFMT SPFMT ACCFMT HDRFMT
format
USBMEM
ETH-C
OFF
Print Destination Ports
COM RS-232/485 port – J3 (Section 2.5.3 on page 17)
USBCOM USB Device Port – J4 (Section 2.5.4 on page 17)
ETH-S Ethernet Server – J6 (Section 9.1 on page 87)
ETH-C Ethernet Client – J6 (Section 9.1 on page 87)
USBMEM Print to file on USB flash drive (Section 9.2.2 on
page 92)
Figure 3-17. Print Format Menu Structure
Table 3-14. Print Format Menu Parameters
PFORMAT Menu
Parameter Choices Description
GFMT Alphanumeric, Max Length: 1000
FMT Normal mode, no tare in system
GROSS<G><NL2><TD><NL>
PORT The communications port the print data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
NFMT Alphanumeric, Max Length: 1000
FMT Normal mode, tare in system.
GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N><NL2><TD><NL>
PORT The communications port the print data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
ACCFMT Alphanumeric, Max Length: 1000
FMT Accumulator enabled and displayed, or setpoint print operation with PSHACC=ON.
ACCUM<A><NL><DA><TI><NL>
PORT The communications port the print data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
SPFMT Alphanumeric, Max Length: 1000
FMT Setpoint print operation with PSHPRNT=ON.
<SCV><SP><SPM><NL>
PORT The communications port the print data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
HDRFMT Must be inserted into other print format. Alphanumeric, maximum length 300.
COMPANY NAME<NL>STREET ADDRESS<NL>CITY, ST ZIP<NL2>
Note
For all PORT choices, if the COM port is set to TYPE = RS485, the port will not perform a demand print.

See Section 10.6.3.