Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 73)

EDP Commands 67
Scales Menu
Table 6-3. Scales EDP Commands
Command Menu Description Choices / Range
SC.ACCUM#1 ACCUM Accumulator OFF, ON
SC.DFTHRH#1 DFTHRH Digital filter cutout threshold 0-99999
SC.DSPRATE#1 DSPRAT Display Update Rate (in 0.1 sec intervals) 1-80
SC.DFSENS#1 DFSENS Digital filter cutout sensitivity LIGHT,MEDIUM,HEAVY
SC.GRADS#1 GRADS Graduations 1 - 100000
SC.MOTBAND#1 MOTBAN Motion Band (in divisions) 0-100
SC.OVRLOAD#1 OVRLOA Overload FS+2% , FS+1D , FS+9D , FS
SC.PWRUPMD#1 PWRUPM Power Up Mode GO, DELAY
SC.RANGE1.MAX#1 MAX1 Maximum weight for first range or interval 0.0 - 999999.0
SC.RANGE2.MAX#1 MAX2 Maximum weight for second range or interval 0.0 - 999999.0
SC.RANGE3.MAX#1 MAX3 Maximum weight for third range or interval 0.0 - 999999.0
SC.SMPRAT#1 SMPRAT Sample Rate 7.5HZ, 15HZ, 30HZ , 60HZ,
120HZ, 240HZ, 480HZ, 960HZ
SC.SPLIT#1 SPLIT Specifies full range, multi-range, or
multi-interval OFF, 2RNG, 3RNG, 2INTVL, 3INTVL
SC.SSTIME#1 SSTIME Stand still time (in 0.1 sec intervals) 1 - 65535
SC.TAREFN#1 TAREFN Tare Function BOTH, NOTARE, PBTARE, KEYED
SC.THRESH#1 THRESH Accumulator Zero Threshold 0-999999
SC.ZRANGE#1 ZRANGE Zero range (in %) 0.0 - 100.0
SC.ZTRKBND#1 ZTRKBN Zero track band (in divisions) 0.0 - 100.0
Format Menu
Table 6-4. FORMAT EDP Commands
Command Menu Description Choices / Range
If SPLIT = 2RNG, 3RNG, 2INTVL, 3INTVL
SC.PRI.DECPNT#1 DECPNT1 Decimal point location for first range or interval 888888, 888880, 8.88888, 88.8888,
888.888, 8888.88, 88888.8
SC.SEC.DECPNT#1 DECPNT2 Decimal point location for second range or
interval 888888, 888880, 8.88888, 88.8888,
888.888, 8888.88, 88888.8
SC.TER.DECPNT#1 DECPNT3 Decimal point location for third range or
interval. Only available in 3RNG or 3INTVL 888888, 888880, 8.88888, 88.8888,
888.888, 8888.88, 88888.8
SC.PRI.DSPDIV#1 DDIV1 Range/Interval (1 division size) 1D, 2D, 5D
SC.SEC.DSPDIV#1 DDIV2 Range/Interval (2 division size) 1D, 2D, 5D
SC.TER.DSPDIV#1 DDIV3 Range/Interval (3 division size)
Only available in 3RNG or 3INTVL. 1D, 2D, 5D
If SPLIT = OFF
SC.PRI.DECPNT#1 DECPNT Decimal point location (for primary units) 888888, 888880, 8.88888, 88.8888,
888.888, 8888.88, 88888.8
SC.PRI.DSPDIV#1 DSPDIV Display divisions 1D, 2D, 5D
SC.PRI.UNITS#1 UNITS Specifies primary units for displayed and
printed weight LB, KG, OZ, TN, T, G, NONE
SC.SEC.DECPNT#1 DECPNT Decimal point location (for secondary units) 888888, 888880, 8.88888, 88.8888,
888.888, 8888.88, 88888.8
SC.SEC.DSPDIV#1 DSPDIV Display divisions (for secondary units) 1D, 2D, 5D
SC.SEC.UNITS#1 UNITS Specifies secondary units for displayed and
printed weight LB, KG, OZ, TN, T, G, NONE