Rice Lake TransAct 5.0 - Installation & Operation Manual - Manual (Page 303)

292
Tolerance is the weight at which the program recognizes movement on the scale. In most
cases, the scale indicator will supply a flag or bit that is used to determine motion. Some
indicators do not. In these cases, the program will determine scale motion using the
tolerance value. Transactions cannot be stored while the scale is in motion.
Zero Band
Zero Band is only used in unattended mode transactions. It is the weight about zero at
which the program will automatically zero the scale. The scale must stabilize within this
band and an auto zero command must be defined for the scale port before the zeroing
takes place.
Minimum Net Weight
You can require a minimum net weight for your transactions. Minimum net weight can
also be set for each truck. The value entered here will be used for trucks with no
minimum net weight specified.
Maximum Net Weight
You can specify a maximum net weight for your transactions. Maximum net weight can
also be set for each truck. The value entered here will be used for trucks with no
maximum net weight specified. Zero disables the check for maximum net weight.
Minimum Gross Weight
You can require a minimum gross weight for your transactions. Minimum gross weight
can also be set for each truck. The value entered here will be used for trucks with no
minimum gross weight specified.
Maximum Gross Weight
You can specify a maximum gross weight for your transactions. Maximum gross weight
can also be set for each truck. The value entered here will be used for trucks with no
maximum gross weight specified. Zero disables the check for maximum gross weight.
Display Target Weight As
The target weight is calculated as the total maximum gross weights for all the vehicles on
the scale (truck, container, trailer, etc.) less the current tare weight. You can choose to
display the target in the current Ticket Units or in one of two user units, if defined and a
conversion factor has been specified for the selected material.
Zero Return