Rice Lake TransAct 5.0 - Installation & Operation Manual User Manual
Page 289
278
(Note: For multiple item tickets, the task is triggered
after the last item has been completed.)
Interval (secs)
This field is enabled when frequency is set to On Timed Interval. Enter a time of 0 to
32000 seconds. If zero is entered, the task will never be triggered.
Trigger File
This field is enabled when frequency is set to On Demand. Enter the full path and name
of a file that when detected, will trigger this task. Wild card characters (* and ?) are
allowed in the file name. The trigger file is deleted after the task has completed.
Command
This field is enabled for the Run Command ? events. This is a command line that will be
executed when the task is triggered.
Wait for Command to Complete
Check this box to force the program to wait for the above command to complete before
continuing. We suggest you check this box only when transactions are being processed in
unattended mode.
Run in Minimized Window
Check this box to run the command in a minimized window (task bar icon only).
Refresh DB Map to Network Drive
The database may be located on a server on the network. The connection to that server
may be lost. You can have the program automatically attempt to reconnect to the server if
you supply the mapping information. Typically, a drive letter on your PC will be mapped
to a folder on the server. An example would be drive I is mapped to
\\myServer\Database\. The reconnection attempt will occur before every ticket.