Rice Lake TransAct 5.0 - Installation & Operation Manual - Manual (Page 41)

30
Accounting Setup
Minimum Charge Screen
The Minimum Charge screen contains options that control the behavior of the minimum
charge calculation.
How to Get Here
Accounting-->Setup…-->Minimum Charge Radio Button
Field Descriptions
Prompt Before Applying
If checked, a prompt will appear in either the Weigh screen or the Quick Scan screen
before a minimum charge is applied.
Apply as Lump Sum
If checked, the decision to apply minimum charge is based on the sum of the minimum
charge components and the total material charge. Otherwise, the minimum charge is
applied to each charge component separately.