Rice Lake TransAct 5.0 - Installation & Operation Manual - Manual (Page 52)

41
Incoming Price, Outgoing Price
A price can be entered for both incoming and outgoing materials. Select the material
direction for which you are entering prices.
Price Table Listing
This list contains the material prices for the selected table, component and direction. The
lists for the default and minimum charge tables will automatically contain an entry for
every material. These entries cannot be deleted. Other tables only require an entry for
those materials that have a price different than the default table.
Change
When any value for a material is changed, this column will contain "upd". If a material is
added, it will contain "new". If the row is deleted, it will contain "del". Changes,
additions and deletions do not take effect until the Save button is clicked.
Code, Description
This drop down list contains all the materials.
Tons
Enter the per ton price for this material.
Unit
Enter the per unit price for this material.
If you are calculating charges based on user defined units, then this column is used to
enter the price per user unit 2. The Tons and Yard columns must be zero before a charge
is based on user unit 2. If Tons is not zero for all price components, then the program
assumes this is a per unit price regardless of whether the user defined unit option is
turned on.
Yard
Enter the per yard price for the material.
If you are calculating charges based on user defined units, then this column is used to
enter the price per user unit 1. The Tons and Unit columns must be zero before a charge
is based on user unit 1. If Tons is not zero for all price components, then the program
assumes this is a per yard price regardless of whether the user defined unit option is
turned on.