7b1.5 assembling and installing the balance, Assembling the balance, 7b 1.5 – Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual User Manual
Page 18: Assembling and installing the balance, 5 assembling and installing the balance
14 RL-TS Series Operation Manual
7B
1.5 Assembling and Installing the Balance
Assembling the balance
Assemble the main unit with the following steps:
1
Attach the pan base.
Place the pan base by aligning it to the projections
provided on the main unit and then fix it by turning the
screws using a tool such as a coin.
Attach the pan base by aligning it to the projections on
the main unit.
Do not overtighten the screws. Fix it by turning the
screws using a tool such as a coin.
2
Attach the pan.
Place the pan on the pan base.
3
Connect the power cord.
Connect the jack provided on the rear of the main unit to
a power receptacle using the AC adapter.
Align the hole of the pan
base to the projection of
the main unit
.
Fix the pan base by
turning the screw.