Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 23)

RL-TS Series Operation Manual 19
9B
2.2 Weighing by Placing a Sample in a Container (Tare)
When measuring weight with the sample in a container (tare), only the sample is weighed by subtracting the
weight of the container. This is called “tare.
1
Place the container on the pan. The weight of the container is displayed.
2
Set the tare. Press the [Zero/Tare] key.
The readout becomes zero, and “→ 0 ←” and
“Net” are displayed (tare range setting).
When “Net” is not displayed even though the
[Zero/Tare] key is pressed, zero-point
adjustment is being executed, not tare range
setting.
3
Place the sample in the container. The weight of only the sample is displayed.
When a tare range is set, the weighable range is reduced by the weight of the
tare.
Weighable range = original weighing capacity – pan weight
Reference