Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 29)

RL-TS Series Operation Manual 25
13B
3.1 Weighing (Weighing Machine)
By default, the balance is set to “weighing machine” mode. To return to weighing machine mode from other
weighing modes, use the following operation:
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting
Basics (P.
X
22
X
).)
Press and hold the [Function] key. After “Func” is
displayed, release the finger.
“1.SEt” is displayed.
2
Select “Weighing Machine.” Press the [Zero/Tare] key several times to select
“1.SEt 1.”
3
Press the [Target] key.
The setting is saved and the display returns to showing the
sample’s normal weight.