62bsample connection with a pc, 62b sample connection with a pc, Reference – Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual User Manual
Page 72: Sample connection with a pc
Advertising
68 RL-TS Series Operation Manual
You can set a tare range or adjust the zero-point from an external device by connecting a
contact or a transistor switch between the pin for externally setting a tare range (Pin 9) to the
pin for signal ground (Pin 5). In this case, allow at least 400 ms for connection (ON) time
(Maximum voltage when the balance is turned OFF: 15 V, sink current when it is turned ON:
20 mA.)
62B
Sample connection with a PC
Use the following examples as a guide to connect the balance to external devices using the cable.
- Sample connection with a PC/AT compatible machine
Reference
Advertising