Do not use the balance in the following places – Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual User Manual
Page 8
4 RL-TS Series Operation Manual
Do not use the balance in the following places:
Location where it may
be subject to air from
an air-conditioning unit:
Extreme changes in the
ambient temperature may
result in inaccurate
measurements.
Location where it may
be subjected to abrupt
changes in ambient
temperature or
humidity:
Accurate measurement
may be rendered
impossible. Use the
balance in an ambient
temperature range of 0
°C
to 40
°C and with 80% or
lower relative humidity.
Location where it is
subject to direct
sunlight:
An internal temperature
increase in the balance
may lead to inaccurate
measurement.
Unstable base or
location where it may
be subjected to
vibration:
In addition to failing to
measure the sample
accurately, the loaded
sample may fall off the
pan and cause an injury.
Soft floor:
When loaded with a
sample, the balance may
tip or move, preventing
accurate measurements
from being conducted.
Tilted surface:
When the balance is tilted,
an error may be caused,
preventing accurate
measurement from being
conducted. Place the
balance on a level
surface.