10b2.3 weighing an added sample, 10b 2.3, Weighing an added sample – Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual User Manual
Page 24: 3 weighing an added sample
Advertising
20 RL-TS Series Operation Manual
10B
2.3 Weighing an Added Sample
Place an additional sample. Only the added weight is measured.
1
Place the sample.
The weight of the placed sample is displayed.
2
Set the tare.
Press the [Zero/Tare] key.
The readout becomes zero (tare range setting).
3
Place the additional sample.
The weight of only the added sample is displayed.
Advertising