Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 7)

RL-TS Series Operation Manual 3
When the balance is not
waterproof and dustproof, do
not expose the balance to
rain, water, dust, or such
other environment.
Even though the balance is
waterproofed and dustproofed,
water and dust may enter the
unit if the connector cap to the
underfloor weigher hole is
detached.
Accurate measurement may be
rendered impossible in a location
where the balance is subjected
to rain or water, or in a dusty
environment.
Do not lay the AC adapter
cable on the surface of a
passage.
Somebody may trip on the cable,
causing the balance to fall,
thereby causing injury and/or
damage to the balance.
Do not move the
balance when a sample
is loaded.
The loaded sample may
fall off the pan and cause
an injury and/or damage
to the sample and
surrounding objects.
Do not place the
balance on an unstable
base or use the
balance in a location
where it may be
subjected to vibration.
The loaded sample may
fall off the pan and cause
an injury and/or damage
to the sample and
surrounding objects.
Accurate measurement
may be rendered
impossible.
Avoid applying excess
force or impact to the
balance.
To prevent breakage or
malfunction, place the
sample to be measured
on the balance carefully.
Do not use volatile
solvents for cleaning.
The body may be
distorted. To clean the unit
of stains, use a piece of
dry cloth or cloth soaked
in a small quantity of
neutral detergent.