Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 89)

RL-TS Series Operation Manual 85
35B
7.4 Maintenance
When taking care of the balance, be careful of the following:
67B
For heavy dirt
If the balance is very dirty, disassemble and clean it.
The parts that you can remove are only the pan and the pan base.
Removing parts other than the pan and the pan base damages the waterproof function
of the balance, resulting in possible failure.
68B
How to take care of the balance
To clean the main unit, use a piece of dry soft cloth.
If the unit is very dirty, use a cloth soaked in a small quantity of neutral detergent or cleaning solvent. If the
unit is extremely dirty, wash it with water and dry it well with a dry cloth.
When washing the main unit with water, do not submerge it in water.
Check that the power cap, the RS232 connector cap, and the battery case are tightly
attached.
Do not scratch the diaphragm and the bottom ventilation hole using a sharp object,
hard brush, or other such hazardous tools.
Diaphragm
Bottom ventilation holes
Pan base