Altera 50G Interlaken MegaCore Function - Manual (Page 26)

and enables the 50G Interlaken IP core to perform enhanced scheduling based on the
BurstMax
and
BurstMin
settings. If the data bursts that arrive on the TX application interface might be interleaved
between channels, then you must set Transfer mode selection to the value of Interleaved.
The default value of the Transfer mode selection parameter is Interleaved.
Related Information
Interleaved and Packet Modes on page 4-7
UG-01140
2015.05.04
Transfer Mode Selection 3-3
50G Interlaken IP Core Parameter Settings Altera Corporation
Send Feedback