Transceiver reconfiguration controller interface, Arria 10 external pll interface, Arria 10 transceiver reconfiguration interface – Altera 50G Interlaken MegaCore Function User Manual

Page 29

Advertising
background image

Arria 10 Transceiver Reconfiguration Interface

on page 4-3

Transceiver Reconfiguration Controller Interface

50G Interlaken IP core variations that target an Arria V or a Stratix V device require an external reconfi‐

guration controller to function correctly in hardware. 50G Interlaken IP core variations that target an

Arria 10 device include a reconfiguration controller block and do not require an external reconfiguration

controller.

Related Information

Altera Transceiver PHY IP Core User Guide

Describes the Altera Transceiver Reconfiguration Controller and the signals that connect to the

50G Interlaken IP core transceiver reconfiguration controller interface.

Arria 10 External PLL Interface

50G Interlaken IP core variations that target an Arria 10 device require an external transceiver PLL to

function correctly in hardware. 50G Interlaken IP core variations that target an Arria V or Stratix V

device include the transceiver PLLs and do not require that you configure any additional PLLs.

Related Information

Adding the External PLL

on page 2-12

Describes how to generate an external TX PLL, including parameter requirements.

Arria 10 External PLL Interface Signals

on page 5-15

Arria 10 Transceiver PHY User Guide

Information about the Arria 10 transceiver PLLs and clock network.

Arria 10 Transceiver Reconfiguration Interface

The Arria 10 transceiver reconfiguration interface provides access to the registers in the embedded Arria

10 Native PHY IP core. This interface provides direct access to the hard PCS registers on the device.
This interface is available only in variations that target an Arria 10 device. In variations that target an

Arria V device or a Stratix V device, user logic reconfigures the transceivers through the transceiver

reconfiguration controller, an external block that you must instantiate in your design outside the

50G Interlaken IP core.
The Arria 10 transceiver reconfiguration interface complies with the Avalon Memory-Mapped (Avalon-

MM) specification defined in the Avalon Interface Specifications.

Related Information

Avalon Interface Specifications

Defines the Avalon Memory-Mapped (Avalon-MM) specification.

Arria 10 Transceiver PHY User Guide

Information about the Arria 10 transceiver reconfiguration interface.

Arria 10 Transceiver Registers

Information about the Arria 10 transceiver registers.

UG-01140

2015.05.04

Transceiver Reconfiguration Controller Interface

4-3

Functional Description

Altera Corporation

Send Feedback

Advertising