BINDER KBF LQC 240 - Manual (Page 22)

KBF LQC (E5.3) 07/2014 page 22/114
CAUTION
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
∅
Do NOT lift or transport the unit using the door handle, the door or the lower housing.
 Lift units size 240 from the pallet at the four lower corners with the aid of six people or
with a fork lifter. Set the fork lifter only from the front or rear in the middle of the unit.
 Lift units size 720 from the pallet using technical devices (fork lifter). Set the fork lifter
only from the front or rear in the middle of the unit.
∅ Do NOT set the fork lifter from the unit side.
If you need to return the unit, please use the original packing and observe the guidelines for safe lifting
and transportation (chap. 3.2).
For disposal of the transport packing, see chap. 19.1.
Note on second-hand units (Ex-Demo-Units):
Second-hand units are units that have been used for a short time for tests or exhibitions. They are thor-
oughly tested before resale. BINDER ensures that the chamber is technically sound and will work flaw-
lessly.
Second-hand units are marked with a sticker on the unit door. Please remove the sticker before commis-
sioning the unit.
3.2 Guidelines for safe lifting and transportation
The front castors of the KBF LQC can be blocked by brakes. Please move the units with castors only
when empty and on an even surface, otherwise the castors may be damaged. After operation please
observe the guidelines for temporarily decommissioning the unit (chap. 19.2).
CAUTION
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.

Transport the unit only in its original packaging.
 Secure the constant climate chamber with transport straps for transport.
∅ Do NOT lift or transport the unit using the door handle, the door or the lower housing.
 Lift units size 240 at the four lower corners with the aid of 6 people or with a fork lifter.
Set the fork lifter only from the front or rear in the middle of the unit.
 Lift units size 720 using technical devices (fork lifter). Set the fork lifter only from the
front or rear in the middle of the unit.
∅ Do NOT set the fork lifter from the unit side.