BINDER KBF LQC 240 - Manual (Page 40)

KBF LQC (E5.3) 07/2014 page 40/114
7. Graphic representation of the historical measurement (chart
recorder function)
The representation of data imitates a chart recorder and allows recalling any set of measured data at any
point of time taken from the recorded period.
Normal display of the chart recorder function:
Top left: The actual date and time are displayed.
Below: The current values of temperature [ °C], humidity
[% r.H.], VIS [kLUX] and UVA [W/m 2 ] are numerically and
graphically displayed.
Scaling:
Temperature: -10 °C / 14°F to 100 °C / 212°F
Humidity: 0% r.H. to 100% r.H.
VIS: 0 kLUX to 50 kLUX
UVA: 0 W/m 2 to 50 W/m 2
Button permits toggling between different repre-
sentations.
Depending on the selected kind of representation, button
H
might not have been visible until this procedure.
The lines displayed at the right inform about the illumination:
The
left line indicates the state of the cool white fluorescent tubes. Enlarged line = cool white tubes on.
The right line indicates the state of the Synergy Light fluorescent tubes. Enlarged line = Synergy Light
tubes on.
History display with cursor:
Select button
H
= History. A pink line appears on
the display marking as a cursor the selected moment.
You can now recall the recorded data of any defined
moment.
Top left: Date and time of the selected cursor position are
displayed.
Below: The corresponding temperature and humidity
values of this instance are numerically and graphically
displayed.
Scroll the cursor position using the arrow buttons.
Single arrow buttons: fine-tuning.
Double arrow buttons: page-up and page-down.
Toggle to the zoom display by pressing button .:
History - zoom function
Magnifier buttons
: Zoom and zoom back
(i.e., shorten or extend the displayed period).
Toggle back to the former representation display using
this button .
11:32:19 15.12.13
11:32:19 15.12.13
11:32:14 15.12.13