Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 104)

Example Applications
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 104
A.3 List of Supported Example Applications
The following is an automatically generated output (based on the files contained in
/opt/bladeservices/bin
and the output obtained via the -h parameter) that describes
all HPI example applications which were available when this manual was written and the usage
of these applications. Note that in the meantime further example applications may have been
added or the functionality of existing HPI example applications may have been changed
slightly. The current usage and functionality can always be obtained by invoking the example
application with the -h parameter.
#
# Lists the usage of all supported HPI-B example programs.
#
# Copyright (c) 2007 by Motorola GmbH
# Copyright (c) 2008, Emerson Network Power - Embedded Computing GmbH
#
#------------------------------#
# hpiautotimer
#------------------------------#
Usage: hpiautotimer [OPTION]...
HPI example application to manage the timeout values of the auto insert
timer and auto extract timer.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through DRT
-r RESOURCE_ID use resource with id RESOURCE_ID
-i INSERT_TIMEOUT set auto insert timeout value in msec to INSERT_TIMEOUT
-e EXTRACT_TIMEOUT set auto extract timeout value in msec to
EXTRACT_TIMEOUT