Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 117)

Example Applications
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 117
Send GetDeviceId command (Lun=0, Netfn=6, Cmd=1) to resource 43 on domain 1:
hpiipmi -d 1 -r 43 0 6 1
#------------------------------#
# hpiled
#------------------------------#
Usage: hpiled [OPTION]...
HPI example application to control the LEDs.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID
-n CONTROL_ID use control with id CONTROL_ID for set operations
-a set control mode to auto
-1 RATE set led on duration rate in 1/100sec [0-255]
-0 RATE set led off duration rate in 1/100sec [0-255]
-t RATE led test
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpilink
#------------------------------#
Usage: hpilink [OPTION]...
HPI example application to display E-Keying link states and optionally
listen for link state events.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID