Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 47)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 47
In the following, the Domain Management Resource and the Shelf Management resource will
be described in detail. A description of typical usage examples/scenarios will be given after
that.
4.4.3.1 Domain Management Resource
The Domain Management Resource acts as container for the Domain Management Control
and is defined as follows.
This Domain Management control is only writable, not readable, and allows the application to
dynamically add and remove domains.
Table 4-2 Definition of Domain Management Resource
SaHpiRptEntryT Value
EntryId
Assigned by HPI
ResourceId
Assigned by HPI
ResourceInfo 0
for all values
ResourceEntity {RACK,0}
this can be changed with the multishelf library
configuration file
ResourceCapabilities SAHPI_CAPABILITY_RESOURCE |
SAHPI_CAPABILITY_RDR |
SAHPI_CAPABILITY_CONTROL
ResourceSeverity SAHPI_MAJOR
DomainId 0
IdString
Domain management
Adding/removing a domain using this HPI control has the same effect as adding/removing a
shelf by adding/removing an entry in the multishelf library configuration file. Therefore,
whenever you use this HPI control to add/remove a domain, the software automatically
updates the configuration file as well.