Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 107)

Example Applications
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 107
-x additionally output the IPMI boot paramater as hexdump
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpichassisstatus
#------------------------------#
Usage: hpichassisstatus [OPTION]...
HPI example application to display the control state of the chassis status
control.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through DRT
-r RESOURCE_ID use resource with id RESOURCE_ID
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpicooling
#------------------------------#
Usage: hpicooling [OPTION]...
HPI example application to control the cooling mode.
Note: Only applicable if the HPI daemon runs in Shelf Manager mode.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through DRT
-r RESOURCE_ID use resource with id RESOURCE_ID