Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 118)

Example Applications
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 118
-r RESOURCE_ID use resource with id RESOURCE_ID
-e listen for E-Keying link state events
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpilist
#------------------------------#
Usage: hpilist [OPTION]...
HPI example application to list all RPT/RDR entries and to get all events.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through DRT
-r RESOURCE_ID use resource with id RESOURCE_ID
-s output short information (don't display RDR data)
-y SENSOR_NUM return value of sensor number SENSOR_NUM of resource with
id RESOURCE_ID
-z [1/0] enable/disable events from sensor number SENSOR_NUM of
resource with id RESOURCE_ID
-t don't display Timestamps
-p CSIWDF display only Control,Sensor,Watchdog,Inventory,Dimi,Fumi
(ignored if no valid parameter is given)
-e listen for events
-n no discover (useful for just getting events)
-i interactive mode (for development use only)
-V print version information and exit