Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 116)

Example Applications
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 116
#------------------------------#
Usage: hpiipmb0 [OPTION]...
HPI example application to set the IPMB-A or IPMB-B state control.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through the DRT
-r RESOURCE_ID use resource with id RESOURCE_ID
-a {0|1} isolate/join IPMB-A
-b {0|1} isolate/join IPMB-B
-l LINK_NUM use link number LINK_NUM when isolating the IPMB
-V print version information and exit
-h print this help and exit
#------------------------------#
# hpiipmi
#------------------------------#
Usage: hpiipmi [OPTION]... LUN NETFN CMD [DATA]
HPI example application to send native IPMI commands using the
Motorola/Emerson specific IPMI control.
LUN, NETFN, CMD and DATA will be interpreted as hexadecimal values
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID
-V print version information and exit
-h display this help and exit
Example: