Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 26)

Software Installation and Configuration
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 26
RmcpPrivLimit
Privilege needed for
using RMCP service
"callback |
user |
operator |
admin"
[admin]
- highest privilege
admin
RmcpAllowedAuthsCallback
Allowed
authentication
mechanisms for
privilege level
'callback
"none | md2
| md5 |
straight" "[none, md2, md5,
straight]" none
RmcpAllowedAuthsUser
Allowed
authentication
mechanisms for
privilege level 'user
"none | md2
| md5 |
straight" "[none, md2, md5,
straight]" none
RmcpAllowedAuthsOperator
Allowed
authentication
mechanisms for
privilege level
'operator
"none | md2
| md5 |
straight" "[none, md2, md5,
straight]" none
RmcpAllowedAuthsAdmin
Allowed
authentication
mechanisms for
privilege level
'operator
"none | md2
| md5 |
straight" "[none, md2, md5,
straight]" none
RmcpGuid
RMCP group user id
16 hex bytes [01 02 03 04 05 06 07 08 09
10 11 12 13 14 15 16]
- default
guid
All zeros (16
bytes)
RmcpUser[X]
X is an integer
Ex: RmcpUser2, RmcpUser3,
RmcpUser4 etc
RMCP users
<U><P><Pr><
MS><A>
U -
username
P -
Password
Pr -
Privilege
MS -
Maximum
number of
sessions
A -
Authentication
[RmcpUser[2,3,4,5,6]]
are
available in config file
Ex:
RmcpUser6 = "Administrator
Administrator admin 64 none
md2 md5 straight"
NA
SelMaxEntries
Maximum number of
entries in the SEL
<0…N> [240] 1024
SelCleanPolicy
Policy to
retain/remove the
SEL entries once
maximum is reached
“true |
false” [false]
- Will not add the SEL
entries to the SEL, once the SEL is full
true
- Removes the oldest sel entry
when the entries reaches the
SelMaxEntries
false
Table 2-4 Plugin Specific Parameters (continued)
Tag Description Allowed values Default in Config. file Built-in Default