Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 76)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 76
StateUnion.Oem.Body
Parameters
0(SetInProgress)
1(SOL Enable)
2(SOL authentication)
3(Character accumulate interval and
character send threshold)
4(SOL Retry)
5(SOL non-volatile bit rate)
6(SOL volatile bit rate)
7(SOL payload channel)
8(SOL payload port)
For more information, refer to IPMIv2 spec, section 26, SOL
commands, Table 26-5, SOL Configuration Parameters.
Table 4-41 SOL Configuration State (continued)
SaHpiCtrlStateT Value