Example applications – Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) User Manual
Page 114
Example Applications
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C)
114
Usage: hpiha [OPTION]...
HPI example application to show the HA state and to initiate a switch-over.
Options:
-d <domain ID> use domain with ID <domain ID>
-m initiate a Shelf Manager switch-over
-s initiate a HPI Daemon switch-over
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpihotswap
#------------------------------#
Usage: hpihotswap [OPTION]...
HPI example application to invoke hotswap actions.
Note: If calling without options the application switches to interactive
mode.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-s show hotswap resources
-a RESOURCE_ID activate resource
-t RESOURCE_ID deactivate resource
-i RESOURCE_ID insert resource
-e RESOURCE_ID extract resource
-p RESOURCE_ID get powerstate of resource
-u RESOURCE_ID power up resource
-o RESOURCE_ID power down resource