Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 89)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 89
Sol_ForcePayloadEncryption 1: configures SOL to
enforce payload
encryption
0: lets the remote
software control
encryption 0, 1 Do not
enforce
payload
encryption
Sol_ForcePayloadAuthentica
tion 1: configures SOL to
enforce payload
authentication
0: lets the remote
software control
authentication 0, 1 Do not
enforce
payload
authentica
tion
Sol_SolPrivilegeLevel Privilege level that is
required to activate
SOL USER,
OPERATOR,
ADMINI
STRATOR OPERATOR
Sol_CharAccumulate-
Interval Character
accumulate interval
[ms] 5-1275 40
Sol_CharSend-Threshold Character send
threshold 1-255 50
Sol_Retry Retry count 0-7 7
Sol_RetryInterval Retry interval [ms] 0-2550 100
Sol_VolatileBitRate Volatile serial bit rate
[baud] 9600,
19200,
38400,
57600,
115200 9600
Sol_NonVolatileBit-Rate Non-volatile serial
bit rate [baud] 9600,
19200,
38400,
57600,
115200 9600
Sol_AddressMultiplier IP address multiplier any valid IP
address 0.1.0.0
Table 4-52 Configurable SOL Parameters (continued)
Keyword Description
Allowed
Values Default in
Config. File Built-in
Default