Software installation and configuration, Table 2-4 plugin specific parameters (continued) – Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) User Manual
Page 27
Software Installation and Configuration
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C)
27
Script<old_state><new_sta
te>
Ex:
ScriptInitializeAloneScri
ptInitializeActiveetc
State change script
that gets executed
when the HPI state
changes from
old_state to
new_state. This script
is responsible for
setting virtual active
IPs in response to the
state change
“/opt/blade
services/et
c/bbshpib/
StateChange
”
[/opt/bladeservices/etc/bb
s-hpib/StateChange]
/opt/bladeservice
s/etc/bbs-
hpib/StateChange
FumiEnabled
Enabling FUMI plugin
Note: All the
following FUMI
related tags are not
applicable when
FumiEnabled is set to
false
"true |
false"
[true]
- Load the FUMI plugin,
supported on ATCAM100/ ATCA-
MF105
false
- FUMI plugin is not supported
for this ATCAboard
true
FumiTimeout
FUMI timeout
<100..90000
0>
[300000]
- 300 ms
300 ms
FumiRemoveLocalImageAfter
Upgrade
Remove/Retain local
image after upgrade
"yes | no |
true | false
| on | off"
<true|on|yes>
– remove image
after upgrade
true
FumiPreserveOemRecords
Preserve/Don't
preserve OEM records
after upgrade
"yes | no |
true | false
| on | off"
<true|on|yes>
- do not preserve
<false|off|no>
- preserve
Default value is true
true
PowerOnSequencing
To enable/disable
power on
sequencing. Specific
feature of M100 shelf
manager
<0,1>
[1]
– enable
0
– disable
1
PowerBudgetComputation
Power budget
computation
<0,1>
[1]
- Follow the Power Budget
algorithm before allocating the power
0
- No power budget algorithm is
followed
1
Table 2-4 Plugin Specific Parameters (continued)
Tag
Description
Allowed values
Default in Config. file
Built-in Default