Table 4-27, Hpi daemon failover control rdr, Table 4-28 – Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) User Manual
Page 68: Hpi daemon failover control states, Using hpi-b
Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C)
68
Note that the initiation of a switchover is meaningful only when the state of the HPI daemon
redundancy sensor is SAHPI_ES_FULLY_REDUNDANT. If there is no standby HPI daemon
present, an attempt to initiate a switchover will return the error code
SA_ERR_HPI_INVALID_REQUEST
.
Table 4-27 HPI Daemon Failover Control RDR
SaHpiRdrT
Value
Notes
RecordId
Assigned by HPI implementation
RdrType
SAHPI_CTRL_RDR
Entity
Same as Shelf Manager Resource
IsFru
SAHPI_FALSE
RdrTypeUnion.CtrlRec.Num
MOTHPI_CTRL_SWITCHOVER_DAEMO
N_NUM
RdrTypeUnion.CtrlRec.Type
SAHPI_CTRL_TYPE_DIGITAL
RdrTypeUnion.CtrlRec.OutputType
SAHPI_CTRL_GENERIC
RdrTypeUnion.CtrlRec.TypeUnion.Di
gital.Default
SAHPI_CTRL_STATE_OFF
RdrTypeUnion.CtrlRec.DefaultMode.
Mode
SAHPI_CTRL_MODE_MANUAL
RdrTypeUnion.CtrlRec.DefaultMode.
ReadOnly
SAHPI_TRUE
RdrTypeUnion.CtrlRec.WriteOnly
SAHPI_FALSE
RdrTypeUnion.CtrlRec.OEM
Assigned by HPI implementation
RdrTypeUnion.CtrlRec.IdString
MOTHPI_CTRL_SWITCHOVER_DAEMO
N_NAME
Table 4-28 HPI Daemon Failover Control States
SaHpiCtrlStateT
Value
Notes
Type
SAHPI_CTRL_TYPE_DIGITAL
StateUnion.Digital
SAHPI_CTRL_STATE_PULSE_ON |
SAHPI_CTRL_STATE_ OFF