Mathey Dearman CNC Saddle Machine - Manual (Page 11)

CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA Ver 1.0
11
3 Specifications and Capabilities
Table 3-1 CNC Saddle Machine General Specifications
*Auto Selectable
Parameter Minimum Maximum Units
AC Voltage In* (115 range/ 230 range) 90/180 132/264 VAC
Operating Temperature (Low Current) 0 70 °C
Operating Temperature (High Current) 0 50 °C
Storage Temperature -20 85 °C
Storage Humidity (non-condensing) 5 95 %
Operating Humidity (non-condensing) 55 85 %
Vibration (± 7.35 M/(SxS) on X, Y and Z
Axis) 5 50 Hz
Surface Speed 1 45*
(See Table 3)
Inches Per
Minute
Lead In Length 0.1 2.0 Inches
Lead Out Length 0.1 2.0 Inches
Clocking Angle -270 270 °
Default Cut Speed 1 45 Inches Per
Minute
Default Miter Angle 10 85 °
Branch Angle Allowable 10 170 °
Machine Z Travel Maximum 14 Inches
Saddle Hole Kerf Outward Offset 0.01 0.1 Inches
Z Offset Min 0.1 Inches
Follow Through Length .1 1 Inches
Header Diameter Max (Custom) 100 Inches
Centerline Offset
−
𝐻𝑒𝑎𝑑𝑒𝑟 𝑂𝐷
2
−
𝐵𝑟𝑎𝑛𝑐ℎ 𝑂𝐷
2
𝐻𝑒𝑎𝑑𝑒𝑟 𝑂𝐷
2
−
𝐵𝑟𝑎𝑛𝑐ℎ 𝑂𝐷
2
Parameter Requirement
USB Port Protocol USB 2.0 or Higher
Operating System Windows XP or Higher
Software MatheyCNC Software
Software Drivers ARCUS Drivers and Tools