Mathey Dearman CNC Saddle Machine User Manual
Page 71
Advertising
CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA
Ver 1.0
71
6.4.3
The next step in calibrating the CNC machine is to ensure the support rods are installed and adjusted
correctly. This will ensure that the Ring Gear will properly enter the Saddle and Cap Ring cavity.
Follow the on-screen instructions to achieve the proper alignment. (See Figure 6-27)
Figure 6-27 Support Rod Calibration Screen
Advertising