Mathey Dearman CNC Saddle Machine - Manual (Page 111)

CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA Ver 1.0
111
15. Clocking Value– Value for clocking.
16. Edit Clocking Value - Takes the software back to the clocking screen.
17. Centerline Offset Value – Value for centerline offset.
18. Edit Centerline Offset - Takes the software back to the centerline offset screen.
19. Edit Saddle On/Off - Takes the software back to the saddle on/off screen.
20. Cut Name – The value used in this box will be the name of the cut when seen in the recently used cut
screen. It can be changed at any time from this summary screen. When the finish button is pressed the
cut is saved only to the recent cuts list using this name. It is possible to save the file to the host machine
using a different name by clicking the ‘Save Cut Button’ (29).
21. Notes – Whatever text is included in this box will be attached to the previous cut and cut file data until it
is written over. More information about current cut is useful to put in this spot.
22. Cut Length – The overall length of the cut in inches, this value is also displayed on the main cut screen.
23. Z Width – The overall width of the cut in inches, this value is also displayed on the main cut screen.
24. Saddle In/Out – Displays if the cut is a saddle on or saddle in if applicable.
25. Min Z – The smallest overall z value of the cut in inches, this value is also displayed on the main cut
screen.
26. Max Z – The largest overall z value of the cut in inches, this value is also displayed on the main cut screen.
27. Back Button – Go to the previous cut selection screen.
28. Finish Button – Saves and finishes the cut, takes the software to the final and main cut view screen.
From the next screen the cut can be started. To return to this screen click the ‘Return To Configuration
Button’ on the main cut screen.
29. Save Cut – This button will bring up a box to allow the saving of the currently configured cut. Whenever
a cut is saved it can be used on another computer or CNC machine.