Mathey Dearman CNC Saddle Machine User Manual
Page 35
Advertising
CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA
Ver 1.0
35
5.6.12 Recheck all hex nuts to make sure they are tight.
5.6.13 The machine is now ready to run.
NOTE: The calibration process must be completed each time the CNC machine is powered on.
NOTE: The MatheyCNC software must be properly installed, user registered, and software activated
(See Section 6) in order to operate the CNC machine.
Advertising