Mathey Dearman CNC Saddle Machine - Manual (Page 58)

CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA Ver 1.0
58
6.3.6 Sequential Cut Screen (Figure 6-14)
This screen is used to create and edit sequential cuts. Sequential cuts are combinations of previously created
cuts that are all loaded into a single cut file to create a series of cuts executed in an order you specify.
Figure 6-14 Sequential Cut Screen
1. Previous Cuts List – These are all the previous cuts that have been created in the selected pipe
diameter below (6). These previous cuts can be added using the ‘Add’ button (4) to the ‘New
Sequential Cut’ list (2) to create a new sequential cut.
2. New Sequential Cut List – Cuts from the ‘Previous Cuts’ list (1) can be added to this list. Once this
list is populated, a new sequential cut can be created using the ‘Save Sequential Cut’ button (12).
3. Move Up Button – When a cut is selected from the ‘New Sequential Cut’ list (2) this will move the
selected individual cut(s) up or earlier in the cut sequence.
4. Add Button – This will add the selected cut from the ‘Recently Used Cut’ (1) list to the ‘New
Sequential Cut’ (2). Adding a cut to this list will not affect the individual cut in any way and it can still
be used as it was before.